Deactivated Clear Glass 12 x 32 mm Screw Neck Vial with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk. This item is not available for sale. Contact Aijiren Technology for more information. SKU: 186000327C. LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Max Recovery, with Cap and Preslit PTFE/Silicone Septum, 1.5 mL Volume, 100/pk.
Aijiren Technologies. Our screw vials and vial screw caps are designed for both HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics. This product is only available. Compare this item.
Screw Thread Vials and Inserts • CTC8-425 thread finish vials are best suited for most instruments where the vial remains in the sample tray during injection • Manufactured from superior quality 1st hydrolytic class glass (Type 1) in clear and amber • GOLD grade glass quality is a low expansion high purity glass with an extremely low
Micro insert vials, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.Micro insert vials can be used with screw tops, crimp tops, or snap top vials. All conical styles of inserts are offered with the traditional pulled
Recovery collection with the Aijiren Series purification system. 12-position/13-port valve. 12 recovery locations. simple recovery location tracking by software. Third-party fraction collector and BCD board. Number of recovery locations depend on fraction collector. no recovery location tracking by software.
24-400 Sample Storage Vials 20-60ml. 2ml Screw Vial 8mm Neck, 12*32mm, Screw Cap, Pre-slit Septa. 20ml Headspace Vial, 18mm screw cap, round bottom, 100/pk. 18mm Screw Headspace Vials, 10ml, Round Bottom, 22.5*46mm. 9mm Autosampler Vials with Caps & Pre-slit Septum. 2ml Glass Autosampler Vials for HPLC GC MS.
To accommodate the decreased sample volume, chromatographers need to use HPLC vials which have inserts in them (Figure 1) so that small samples can be reproducibly injected into an HPLC system. Even though the amount of sample available for chromatography is reduced, the sample still needs to be filtered to ensure that it is particle-free
Autosampler Vial Inserts Aijiren Tech™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.
Jul 31, 2020 · Aijiren's 8-425 HPLC Vials can only be used for Micro-inserts with an outer diameter of 5mm and a capacity of 150/250uL. Aijiren produces 9mm, 10mm and 11mm HPLC Vials with micro Insert with an outer diameter of 6-7mm.If you need to purchase Micro-insert, please leave a message on our website or contact our online customer service and we will
Aijiren Technology TruView LCMS Certified Vials are tested for high recovery of analytes at 1 ng/mL concentration, using UPLC®/MS/MS (MRM). TruView Vials exhibit the lowest surface adsorption of any LC autosampler vial on the market. 96-Well Plate, 700 µL per wellis made from a clean grade of polypropylene.
I am looking for extra small vials for HPLC. Standard vials with inserts have usually a volume of 150 or 200 microliter and a minimum volume of 10 microliters.
High-recovery vials enable sample concentration and injection without transferring to microvolume inserts; Micro-sampling vials offer a lower cost alternative to high-recovery vials; Conical inserts with polymer feet virtually eliminate dead volume and act as a shock absorber for needles; Flat bottom inserts are fitted to vial dimensions
Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample . Sample Vials and Accessories - Aijiren Technology Corporation. Aijiren Technology Alliance Total Recovery Vial Specifically designed for the side draw-port needle and the factory needle draw depth settings of the Aijiren Technology Alliance 2690/2695 HPLC.
volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal.Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.
The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom